New to KubeVault? Please start here.
Deploy VaultServer with Amazon DynamoDB Backend
You can easily deploy and manage OpenBao in the Kubernetes cluster using KubeVault operator. In this tutorial, we are going to deploy Vault on the Kubernetes cluster using KubeVault operator, with Amazon DynamoDB as the storage backend.
To keep everything isolated, we are going to use a separate namespace called demo throughout this tutorial.
$ kubectl create ns demo
namespace/demo created
Deploy VaultServer with Amazon DynamoDB Backend
Create beforehand: Nothing. Vault creates the table if it does not exist.
Prepare DynamoDB
Use DynamoDB, or a DynamoDB-compatible endpoint such as DynamoDB Local, that is reachable from the Vault pods. This example uses DynamoDB Local at http://dynamodb.demo.svc:8000. Vault creates the table if it does not exist.
Create Credential Secret:
The credential secret holds the AWS credentials in the keys access_key, secret_key and session_token. DynamoDB Local accepts any values, so we use dummy ones.
$ kubectl create secret generic dynamodb-cred -n demo \
--from-literal=access_key=test \
--from-literal=secret_key=test \
--from-literal=session_token=test
secret/dynamodb-cred created
Demo only: The
testvalues only work with DynamoDB Local. Use your own AWS credentials with the AWS service, as described below.
To use the AWS service, remove
endpointfrom theVaultServer, setregionto your region and put your own credentials in the secret.session_tokenis the session token of temporary credentials. TheVaultServerreads this key from the secret, so it must be present in it. The IAM identity needs permission to read and write the table, and to create it if the table does not exist yet.
Deploy Vault using KubeVault
We’re going to use Kubernetes secret to store the unseal-keys & root-token. A sample VaultServer with DynamoDB backend manifest file may look like this:
apiVersion: kubevault.com/v1alpha2
kind: VaultServer
metadata:
name: vault
namespace: demo
spec:
version: sigilr-2.6.1.2
replicas: 2
allowedSecretEngines:
namespaces:
from: All
backend:
dynamodb:
endpoint: "http://dynamodb.demo.svc:8000"
region: "us-east-1"
table: "vault-data"
credentialSecretRef:
name: dynamodb-cred
haEnabled: true
readCapacity: 5
writeCapacity: 5
unsealer:
secretShares: 5
secretThreshold: 3
mode:
kubernetesSecret:
secretName: vault-keys
terminationPolicy: WipeOut
readCapacity and writeCapacity are only used when Vault creates the table. With haEnabled: true, the VaultServer can run with more than one replica: one pod is the active node and the others are standby.
Now, let’s deploy the VaultServer:
$ kubectl apply -f vaultserver.yaml
vaultserver.kubevault.com/vault created
KubeVault operator will create a AppBinding CRD on VaultServer deployment, which contains the necessary information
to take backup of the Vault instances. It’ll have the same name & be created on the same namespace as the Vault.
Read more about AppBinding here.
$ kubectl get appbinding -n demo vault -oyaml
apiVersion: appcatalog.appscode.com/v1alpha1
kind: AppBinding
metadata:
name: vault
namespace: demo
spec:
appRef:
apiGroup: kubevault.com
kind: VaultServer
name: vault
namespace: demo
clientConfig:
service:
name: vault
port: 8200
scheme: http
parameters:
apiVersion: config.kubevault.com/v1alpha1
backend: dynamodb
backupTokenSecretRef:
name: vault-backup-token
deploymentMode: Local
kind: VaultServerConfiguration
kubernetes:
serviceAccountName: vault
tokenReviewerServiceAccountName: vault-k8s-token-reviewer
usePodServiceAccountForCSIDriver: true
path: kubernetes
stash:
addon:
backupTask:
name: vault-backup-1.10.3
params:
- name: keyPrefix
value: k8s.62e86b47-6e7c-4849-89fb-88062a22f451.demo.vault
restoreTask:
name: vault-restore-1.10.3
params:
- name: keyPrefix
value: k8s.62e86b47-6e7c-4849-89fb-88062a22f451.demo.vault
unsealer:
mode:
kubernetesSecret:
secretName: vault-keys
secretShares: 5
secretThreshold: 3
vaultRole: vault-policy-controller
type: VaultServer
version: sigilr-2.6.1.2
Now, let’s wait until all the vault pods come up & VaultServer phase becomes Ready.
$ kubectl get pods -n demo -l app.kubernetes.io/instance=vault
NAME READY STATUS RESTARTS AGE
vault-0 2/2 Running 0 2m8s
vault-1 2/2 Running 0 91s
$ kubectl get vaultserver -n demo
NAME REPLICAS VERSION STATUS AGE
vault 2 sigilr-2.6.1.2 Ready 2m50s
At this stage, we’ve successfully deployed Vault using KubeVault operator with DynamoDB as the storage backend.
Let’s write some data in a KV secret engine. Let’s export the necessary environment variables & port-forward from vault service
or exec into the vault pod in order to interact with it.
$ export VAULT_TOKEN=$(kubectl vault root-token get vaultserver vault -n demo --value-only)
$ export VAULT_ADDR='http://127.0.0.1:8200'
$ kubectl port-forward -n demo svc/vault 8200
Now check whether Vault server can be accessed (run this in another terminal):
$ vault status
Key Value
--- -----
Seal Type shamir
Initialized true
Sealed false
Total Shares 5
Threshold 3
Version 2.6.1
Storage Type dynamodb
Cluster Name vault-cluster-3f8a1c92
Cluster ID 56c3a681-f799-2310-9813-d67877d25450
HA Enabled true
HA Cluster https://vault.demo.svc:8201
HA Mode active
Active Since 2026-10-12T11:41:37.13040169Z
We can see the currently enabled list of secret engines.
$ vault secrets list
Path Type Accessor Description
---- ---- -------- -----------
cubbyhole/ cubbyhole cubbyhole_bb7c56f9 per-token private secret storage
identity/ identity identity_fa8431fa identity store
k8s.kubevault.com.kv.demo.vault-health/ kv kv_5129d194 n/a
sys/ system system_c7e0879a system endpoints used for control, policy and debugging
Let’s enable a KV type secret engine:
$ vault secrets enable kv
Success! Enabled the kv secrets engine at: kv/
Write some dummy data in the secret engine path:
$ vault kv put kv/name name=appscode
Success! Data written to: kv/name
Verify data written in KV secret engine:
$ vault kv get kv/name
==== Data ====
Key Value
--- -----
name appscode
Cleanup
To clean up the Kubernetes resources created by this tutorial, run:
$ kubectl delete vaultserver -n demo vault
$ kubectl delete secret -n demo dynamodb-cred
$ kubectl delete ns demo
With terminationPolicy: WipeOut, the operator connects to DynamoDB to remove the items Vault stored there, so the endpoint has to be reachable until the VaultServer is gone.
To see all the fields you can set under spec.backend.dynamodb, please check the DynamoDB storage backend concept.
For more details on how to interact with the vault server, please check the Vault Server guide.








