You are looking at the documentation of a prior release. To read the documentation of the latest release, please visit here.

New to KubeVault? Please start here.

Reconfigure VaultServer TLS/SSL

KubeVault supports reconfigure i.e. add, remove, update and rotation of TLS/SSL certificates for existing VaultServer via a VaultOpsRequest. This tutorial will show you how to use KubeVault to reconfigure TLS/SSL encryption.

Before You Begin

At first, you need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. If you do not already have a cluster, you can create one by using kind.
Install cert-manger v1.0.0 or later to your cluster to manage your SSL/TLS certificates.
Now, install KubeVault cli on your workstation and KubeVault operator in your cluster following the steps here.
To keep things isolated, this tutorial uses a separate namespace called demo throughout this tutorial.

$ kubectl create ns demo
namespace/demo created

Note: YAML files used in this tutorial are stored in docs/examples/guides/vault-ops-request folder in GitHub repository kubevault/kubevault.

Add TLS to a VaultServer

Here, We are going to create a VaultServer without TLS and then reconfigure the VaultServer to use TLS.

Deploy VaultServer without TLS

In this section, we are going to deploy a VaultServer without TLS. In the next few sections we will reconfigure TLS using VaultOpsRequest CRD. Below is the YAML of the VaultServer CR that we are going to create,

apiVersion: kubevault.com/v1alpha2
kind: VaultServer
metadata:
  name: vault
  namespace: demo
spec:
  version: 1.10.3
  replicas: 3
  allowedSecretEngines:
    namespaces:
      from: All
    secretEngines:
      - gcp
  backend:
    raft:
      storage:
        storageClassName: "standard"
        resources:
          requests:
            storage: 1Gi
  unsealer:
    secretShares: 5
    secretThreshold: 3
    mode:
      kubernetesSecret:
        secretName: vault-keys
  monitor:
    agent: prometheus.io
    prometheus:
      exporter:
        resources: {}
  terminationPolicy: WipeOut

Let’s create the VaultServer CR we have shown above,

$ kubectl create -f https://github.com/kubevault/kubevault/raw/v2024.1.28-rc.1/docs/examples/guides/vault-ops-request/vaultserver.yaml
vaultserver.kubevault.com/vault created

Now, wait until VaultServer has status Ready. i.e,

$ kubectl get vs -n demo
NAME    REPLICAS   VERSION   STATUS   AGE
vault   3          1.12.1    Ready    128m

Create Issuer/ ClusterIssuer

Now, We are going to create an example Issuer that will be used to enable SSL/TLS in VaultServer. Alternatively, you can follow this cert-manager tutorial to create your own Issuer.

Start off by generating a ca certificates using openssl.

$ openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout ./ca.key -out ./ca.crt -subj "/CN=vault/O=kubevault"
Generating a RSA private key
................+++++
........................+++++
writing new private key to './ca.key'
-----

Now we are going to create a ca-secret using the certificate files that we have just generated.

$ kubectl create secret tls vault-ca --cert=ca.crt --key=ca.key --namespace=demo

secret/vault-ca created

Now, Let’s create an Issuer using the vault-ca secret that we have just created. The YAML file looks like this:

apiVersion: cert-manager.io/v1
kind: Issuer
metadata:
  name: issuer
  namespace: demo
spec:
  ca:
    secretName: vault-ca

Let’s apply the YAML file:

$ kubectl create -f https://github.com/kubevault/kubevault/raw/v2024.1.28-rc.1/docs/examples/guides/vault-ops-request/issuer.yaml
issuer.cert-manager.io/issuer created

Create VaultOpsRequest

In order to add TLS to the VaultServer, we have to create a VaultOpsRequest CRO with our created issuer. Below is the YAML of the VaultOpsRequest CRO that we are going to create,

apiVersion: ops.kubevault.com/v1alpha1
kind: VaultOpsRequest
metadata:
  name: vault-ops-add-tls
  namespace: demo
spec:
  type: ReconfigureTLS
  vaultRef:
    name: vault
  tls:
    issuerRef:
      name: issuer
      kind: Issuer
      apiGroup: "cert-manager.io"
    certificates:
      - alias: client
        subject:
          organizations:
            - appscode
          organizationalUnits:
            - client

Here,

spec.vaultRef.name specifies that we are performing reconfigure TLS operation on vault VaultServer.
spec.type specifies that we are performing ReconfigureTLS on our VaultServer.
spec.tls.issuerRef specifies the issuer name, kind and api group.
spec.tls.certificates specifies the certificates.

Let’s create the VaultOpsRequest CR we have shown above,

$ kubectl apply -f https://github.com/kubevault/kubevault/raw/v2024.1.28-rc.1/docs/examples/guides/vault-ops-request/vault-ops-add-tls.yaml
vaultopsrequest.ops.kubevault.com/vault-ops-add-tls created

Verify TLS Enabled Successfully

Let’s wait for VaultOpsRequest to be Successful. Run the following command to watch VaultOpsRequest CRO,

$ kubectl get vaultopsrequest -n demo
Every 2.0s: kubectl get vaultopsrequest -n demo
NAME               TYPE             STATUS        AGE
vault-ops-add-tls  ReconfigureTLS   Successful    91s

Rotate Certificate

Now we are going to rotate the certificate of this VaultServer. First let’s check the current expiration date of the certificate.

$ kubectl exec -it -n demo vault-0 -- bin/sh
/ # cd etc/vault/tls/server
/etc/vault/tls/server # cat tls.crt
-----BEGIN CERTIFICATE-----
MIID2DCCAsCgAwIBAgIQL1rqn4OHpvchiFRI3DPXIjANBgkqhkiG9w0BAQsFADAk
...
XJRRwl5psqcyp5ZJI1ar5JP1JCGQa3QTArwstw==
-----END CERTIFICATE-----

Copy & paste the certificate in any certificates decoding tool like certlogic & check it’s expiry date.

Create VaultOpsRequest

Now we are going to increase it using a VaultOpsRequest. Below is the yaml of the ops request that we are going to create,

apiVersion: ops.kubevault.com/v1alpha1
kind: VaultOpsRequest
metadata:
  name: vault-ops-rotate
  namespace: demo
spec:
  type: ReconfigureTLS
  vaultRef:
    name: vault
  tls:
    rotateCertificates: true

Here,

spec.vaultRef.name specifies that we are performing reconfigure TLS operation on vault VaultServer.
spec.type specifies that we are performing ReconfigureTLS on our VaultServer.
spec.tls.rotateCertificates specifies that we want to rotate the certificate of this VaultServer.

Let’s create the VaultOpsRequest CR we have shown above,

$ kubectl apply -f https://github.com/kubevault/kubevault/raw/v2024.1.28-rc.1/docs/examples/guides/vault-ops-request/vault-ops-rotate.yaml
vaultopsrequest.ops.kubevault.com/vault-ops-rotate created

Verify Certificate Rotated Successfully

Let’s wait for VaultOpsRequest to be Successful. Run the following command to watch VaultOpsRequest CRO,

$ kubectl get vaultopsrequest -n demo
Every 2.0s: kubectl get vaultopsrequest -n demo
NAME                TYPE             STATUS        AGE
vault-ops-rotate    ReconfigureTLS   Successful    112

Now, let’s check the expiration date of the certificate again, it should be updated.

$ kubectl exec -it -n demo vault-0 -- bin/sh
/ # cd etc/vault/tls/server
/etc/vault/tls/server # cat tls.crt
-----BEGIN CERTIFICATE-----
MIID2DCCAsCgAwIBAgIQL1rqn4OHpvchiFRI3DPXIjANBgkqhkiG9w0BAQsFADAk
...
XJRRwl5psqcyp5ZJI1ar5JP1JCGQa3QTArwstw==
-----END CERTIFICATE-----

Change Issuer/ClusterIssuer

Now, we are going to change the issuer of this VaultServer.

Let’s create a new ca certificate and key using a different subject CN=ca-updated,O=kubevault-updated.

$ openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout ./ca.key -out ./ca.crt -subj "/CN=ca-updated/O=kubevault-updated"
Generating a RSA private key
..............................................................+++++
......................................................................................+++++
writing new private key to './ca.key'
-----

Now we are going to create a new ca-secret using the certificate files that we have just generated.

$ kubectl create secret tls vault-new-ca \
     --cert=ca.crt \
     --key=ca.key \
     --namespace=demo
secret/vault-new-ca created

Now, Let’s create a new Issuer using the vault-new-ca secret that we have just created. The YAML file looks like this:

apiVersion: cert-manager.io/v1
kind: Issuer
metadata:
  name: new-issuer
  namespace: demo
spec:
  ca:
    secretName: vault-new-ca

Let’s apply the YAML file:

$ kubectl create -f https://github.com/kubevault/kubevault/raw/v2024.1.28-rc.1/docs/examples/guides/vault-ops-request/new-issuer.yaml
issuer.cert-manager.io/new-issuer created

Create VaultOpsRequest

In order to use the new issuer to issue new certificates, we have to create a VaultOpsRequest CRO with the newly created issuer. Below is the YAML of the VaultOpsRequest CRO that we are going to create,

apiVersion: ops.kubevault.com/v1alpha1
kind: VaultOpsRequest
metadata:
  name: vault-ops-change-issuer
  namespace: demo
spec:
  type: ReconfigureTLS
  vaultRef:
    name: vault
  tls:
    issuerRef:
      name: new-issuer
      kind: Issuer
      apiGroup: "cert-manager.io"

Here,

spec.vaultRef.name specifies that we are performing reconfigure TLS operation on vault VaultServer.
spec.type specifies that we are performing ReconfigureTLS on our VaultServer.
spec.tls.issuerRef specifies the issuer name, kind and api group.

Let’s create the VaultOpsRequest CR we have shown above,

$ kubectl apply -f https://github.com/kubevault/kubevault/raw/v2024.1.28-rc.1/docs/examples/guides/vault-ops-request/vault-ops-change-issuer.yaml
vaultopsrequest.ops.kubevault.com/vault-ops-change-issuer created

Verify Issuer is changed successfully

Let’s wait for VaultOpsRequest to be Successful. Run the following command to watch VaultOpsRequest CRO,

$ kubectl get vaultopsrequest -n demo
Every 2.0s: kubectl get vaultopsrequest -n demo
NAME                       TYPE             STATUS        AGE
vault-ops-change-issuer    ReconfigureTLS   Successful    105s

Remove TLS from the VaultServer

Now, we are going to remove TLS from this VaultServer using a VaultOpsRequest.

Create VaultOpsRequest

Below is the YAML of the VaultOpsRequest CRO that we are going to create,

apiVersion: ops.kubevault.com/v1alpha1
kind: VaultOpsRequest
metadata:
  name: vault-ops-remove
  namespace: demo
spec:
  type: ReconfigureTLS
  vaultRef:
    name: vault
  tls:
    remove: true

Here,

spec.vaultRef.name specifies that we are performing reconfigure TLS operation on vault VaultServer.
spec.type specifies that we are performing ReconfigureTLS on our VaultServer.
spec.tls.remove specifies that we want to remove tls from this VaultServer.

Let’s create the VaultOpsRequest CR we have shown above,

$ kubectl apply -f https://github.com/kubevault/kubevault/raw/v2024.1.28-rc.1/docs/examples/guides/vault-ops-request/vault-ops-remove.yaml
vaultopsrequest.ops.kubeavult.com/vault-ops-remove created

Verify TLS Removed Successfully

Let’s wait for VaultOpsRequest to be Successful. Run the following command to watch VaultOpsRequest CRO,

$ kubectl get vaultopsrequest -n demo
Every 2.0s: kubectl get vaultopsrequest -n demo
NAME               TYPE             STATUS        AGE
vault-ops-remove   ReconfigureTLS   Successful    105s

Cleaning up

To clean up the Kubernetes resources created by this tutorial, run:

kubectl delete vaultserver -n demo vault
kubectl delete issuer -n demo issuer new-issuer
kubectl delete vaultopsrequest vault-ops-add-tls vault-ops-remove vault-ops-rotate vault-ops-change-issuer
kubectl delete ns demo

KubeDB

KubeStash New

Stash

KubeVault

Voyager

ConfigSyncer

Guard

RESOURCES

Vault Kubernetes Deployment

Auto Initialization & Unsealing

Vault Backup & Restore

Consume KubeVault Secrets with CSI

Manage DB Users Privileges

Storage Backend

Authentication Method

Database Secret Engine

Azure Secret Engine

AWS Secret Engine

GCP Secret Engine

Kubectl Plugin

Vault Operator

KubeVault CLI

Vault Unsealer

Reconfigure VaultServer TLS/SSL

Before You Begin

Add TLS to a VaultServer

Deploy VaultServer without TLS

Create Issuer/ ClusterIssuer

Create VaultOpsRequest

Verify TLS Enabled Successfully

Rotate Certificate

Create VaultOpsRequest

Verify Certificate Rotated Successfully

Change Issuer/ClusterIssuer

Create VaultOpsRequest

Verify Issuer is changed successfully

Remove TLS from the VaultServer

Create VaultOpsRequest

Verify TLS Removed Successfully

Cleaning up

What's on this Page

Search